Fujikura FSM-50S Fusion Splicer
Check out the selection of new and used Fujikura FSM-50S fusion splicers on eBay. You won't find lower prices anywhere else!
The FSM-50S fusion splicer from Fujikura sets the standard for core alignment fusion splicers. The FSM-50S is one of the the fastest field splicers available. It can complete a splice and tube heat in a total of 44 seconds.
Some of the special features of the FSM-50S include its small size, light weight and the legendary ruggedness Fujikura splicers are renowned for.
The FSM-50S also includes user-friendly features such as calibration-free arc adjustments, automatic fiber type identification and reduced operational steps. The FSM-50S also offers increased flexibility for various splicing tasks with user-selectable front and back monitor positioning.
Product Features:
- Automatic core to core, low-loss splicing regardless of fiber quality or age
- 9-second splicing time
- 35-second heat time (60mm sleeve)
- Dual, user selectable monitor position
- Excellent visibility in bright sunlight with 5.6" TFT Color LCD display
- Automatic arc calibration
- Long life battery (up to 160 splice/shrink cycles per charge)
Specifications:
- Applicable Fibers: SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)
- Cladding Diameter: 80?m -150?m
- Coating Diameter: 100?m to 1000?m
- Fiber Cleave Length: 8 to 16mm with 250?m coating diameter. 16mm with 900?mcoating diameter.
- Typical Average Splice Loss: 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS. Measured by cut-back method relevant to ITU-T and IEC standards.
- Splicing Time: Typical 9 seconds with standard SM fiber
- Arc Calibration Method: Automatic, using results of previous splice when in AUTO mode. Manual arc calibration function available.
- Splicing Modes: 40 user programmable modes and up to 60 modes for reference (factory predetermined setting).
- Splice Loss Estimate: Based upon dual camera core alignment data.
- Storage of Splice Result: The last 2000 results to be stored in the internal memory.
- Fiber Display: X / Y, or both X and Y simultaneously. Front or rear monitor display options.
- Magnification: 295x for single X or Y view, or 147x for X and Y view.
- Viewing Method: Dual cameras with 5.6 inch color LCD monitor.
- Operating Condition: 0 to 5,000m above sea level, 0 to 95%RH and -10 to 50°C respectively.
- Mechanical Proof Test: 2N
- Tube Heater: Built-in tube heater with 30 heating modes.
- Tube Heating Time: Typical 35 seconds with FP-03 protection sleeve.
- Applicable Protection Sleeve Length: 60mm, 40mm, micro
- Number of Splice/heat With Battery: Typical 80 cycles with BTR-06(S) / Typical 160 cycles with BTR-06(L).
- Power Supply: Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11. 13.2V DC with BTR-06(S)/(L).
- Terminals: USB 1.1 (USB-B type) for PC communication. Video terminal RCA video jack / NTSC.
- Wind Protection: Max. wind velocity of 15m/s. (34 mph)
- Dimensions: 150W x 150D x 150H (mm) / 5.9W x 5.9D x 5.9H (inches)
- Weight: 2.8 kg (6.4 lbs.) including AC adapter ADC-11
