Fujikura FSM-40F Fusion Splicer

Check out the selection of new and used Fujikura FSM-40F fusion splicers on eBay. You won’t find lower prices anywhere else!

Fujikura FSM-40F Membrane Keypad NEW Fujikura Fujikura FSM-40F/PM
Fujikura FSM-40F Membrane Keypad NEW Fujikura Fujikura FSM-40F/PM
$182.02
Fujikura 250um Clamps for FSM-40F, FSM-40P Fusion splicer
Fujikura 250um Clamps for FSM-40F, FSM-40P Fusion splicer
$269.00
Fujikura 900um Clamps for FSM-40F, FSM-40P Fusion splicer
Fujikura 900um Clamps for FSM-40F, FSM-40P Fusion splicer
$299.00
Fujikura 250um Clamps for FSM-40F, FSM-40P Fusion splicer
Fujikura 250um Clamps for FSM-40F, FSM-40P Fusion splicer
$299.00

Fujikura developed the FSM-40F fusion splicer for the high strength splicing needs of DWDM optical communication devices. The FSM-40F splices dissimilar fiber combinations, especially Erbium-doped fiber to single-mode fiber using patented sweep arc functions.

Fujikura FSM-40F Fusion Splicer

Features:

  • Sweep arc technology minimizes splice loss when splicing dissimilar fibers.
  • Multi-functional movable V-groove and Z-mechanism provides short cleave length splicing with various coating diameters for high tensile strength splicing and small packaging requirements.
  • Fiber holder system increases splicing results by reducing skill dependency.
  • PC Interface and power meter feedback function allows download of splice results and modification of parameters by connection of RS232C cable to PC.

Specifications:

  • Applicable Fibers: SM, MM, DS (dispersion shifted), NZ-DSF (non-zero dispersion shifted), CS (cut-off shifted), ED (erbium-doped) fibers
  • Fiber cleaved length: 8 to 10mm with bare fiber clamping; 3 to 5mm with coating clamping (*Ny Jacketed (Si buffer) or loose tube fiber cannot be used)
  • Actual splice loss: Typical 0.02dB (bare fiber clamping) / 0.03dB (coating clamping) with identical SM fibers (ITU-T G.652)
    Typical 0.04dB (bare fiber clamping) / 0.05dB (coating clamping) with identical DS fibers (ITU-T G.653)
    Typical 0.01dB (bare fiber clamping) / 0.01dB (coating clamping) with identical MM fibers (ITU-T G.651)
  • Splicing time: Typical 25 seconds with SM/MM fibers; Typical 40 seconds with DS/NZ-DS fibers
  • Return loss: >60dB
  • Cross talk with PM fibers: Typical -40dB (0.6 degree) with PANDA
  • High tensile strength splicing performance: Typical 2.5 Gpa (30N) with coating clamping
  • In-line proof tester: Approximately 2N
  • Viewing Method: 5” TFT color LCD monitor with 350X, 270X, 175X, or 135X magnification, external RCA jack for NTSC video signal
  • Splice loss storage: Last 1200 splices
  • Altitude requirement: 0 to 3500m above sea level
  • Operating and storage temperature: 0 to 40°C, 0 to 95% relative humidity (operating); -40 to 80°C, non-dew (storage)
  • Power supply: AC100 to 240V (50/60 Hz) with ADC-10 adapter
  • Dimensions (W x D x H): 311mm x 218mm x 127mm
  • Weight: 5.5kg
Share



Home Top