|
Manufacturers
Equipment
Resources
|
Fujikura FSM-17S Fusion Splicer
The FSM-17S fusion splicer from Fujikura establishes a new standard for single fiber "fixed v-groove" type fusion splicers with a host of improvements including a 35 second tube heater, dual position monitor and a longer battery life. The real time arc calibration feature makes field maintenance easier than ever.
Also available is a version of the FSM-17S which utilizes a fiber holder system, making the splicing process extremely simple for inexperienced technicians. The FSM-17S is well suited for FTTX applications and both models quickly attach to the newly redesigned ASW-02 workstation making field portability a snap.
Fiber Optic Tool Supply aims to be your leading destination for discovering a great selection of low-priced Fujikura fusion splicers. Don't spend more than necessary when you can find the Fujikura equipment you've been looking for right here - and all for prices that won't break your budget! Compare prices on new and used FSM-17S fusion splicers that are available for very affordable prices. We're able to offer you a great selection of competitively priced instruments and tools thanks to our partnership with eBay and their most trusted sellers. You won't find a better deal anywhere else!
Splicer Features:
- 35 second tube heater
- Dual direction monitor position
- Long life battery (up to 160 splices/shrinks per charge)
- Automatic arc calibration
Specifications:
- Applicable Fibers: SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)
- Cladding Diameter: 125μm
- Coating Diameter
- FSM-17S: 250μm to 1000μm
- FSM-17S-FH: 250μm using the FH-50-250 fiber holder or 900μm using the FH-50-900 fiber holder
- Fiber Cleave Length: FSM-17S: 8 to 16mm with 250μm coating diameter - 16mm with 900μm coating diameter.
- Typical Average Splice Loss: 0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS. Measured by cut-back method relevant to ITU-T and IEC standards.
- Splicing Time: Typical 11 seconds with standard SM fiber
- Arc Calibration Method: Automatic, using results of previous splice when in AUTO mode. Manual arc calibration function available.
- Splicing Modes: 40 user programmable modes and up to 60 modes for reference (factory predetermined setting).
- Splice Loss Estimate: Based upon dual camera cladding alignment data.
- Storage of Splice: Result The last 2000 results to be stored in the internal memory.
- Fiber Display: X / Y, or both X and Y simultaneously. Front or rear monitor display options.\
- Magnification: 316x for single X or Y view, or 158x for X and Y view.
- Viewing Method: Dual cameras with 5.6 inch color LCD monitor.
- Operating Condition: 0 to 5,000m above sea level, 0 to 95%RH and -10 to 50°C respectively.
- Mechanical Proof Test: 2N
- Tube Heater: Built-in tube heater with 10 heating modes and up to 20 modes for reference.
- Tube Heating Time: Typical 35 seconds with FP-03 protection sleeve.
- Applicable Protection Sleeve Length: 60mm, 40mm, micro
- No.of Splice/Heat With Battery: Typical 80 cycles with BTR-06(S) / Typical 160 cycles with BTR-06(L).
- Power Supply: Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11. 13.2V DC with BTR-06(S)/(L).
- Terminals: USB 1.1 (USB-B type) for PC communication. Video terminal RCA video jack / NTSC.
- Wind Protection: Max. wind velocity of 15m/s. (34 mph)
- Dimensions: 150W x 150D x 150H (mm) / 5.9W x 5.9D x 5.9H (inches)
- Weight: 2.6 kg (5.7 lbs.) including AC adapter ADC-11
Other Fujikura fusion splicer models:
|
