Fiber Optic Tool Supply
Search:      
Follow Fiber Optic Tool Supply on Twitter

Manufacturers

Equipment

Resources

Fujikura FSM-60R12 Fusion Splicer

The FSM-60R12 fusion splicer offers unmatched versatility and reliability. This full featured ribbon splicer from Fujikura can withstand a drop test of up to 30" and still continue to splice flawlessly. And enhanced, robust features enable the FSM-60R12 to resist shock, dust and rain so that unfortunate environmental conditions do not negatively impact productivity.

Equipped with a user-friendly interface and precision fixed V-groove, the FSM-60R12 offers 2 to 12 fiber ribbon splicing, as well as, single fiber splicing capability. Automated features such as auto-start splicing, auto-start tube heater operation, automatic ribbon fiber identification, and auto-arc calibration reduce operational steps and improve splicing performance. Additional improvements include automatic image orientation when switching the dual position monitor, a large capacity battery option and the ability to charge the battery during splicer operation. The FSM-60R12 ribbon splicer includes software which provides the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the splicer to enhance technical support.

Fiber Optic Tool Supply aims to be your leading destination for discovering a great selection of low-priced Fujikura fusion splicers. Don't spend more than necessary when you can find the Fujikura equipment you've been looking for right here - and all for prices that won't break your budget! Compare prices on new and used FSM-60R12 fusion splicers that are available for very affordable prices. We're able to offer you a great selection of competitively priced instruments and tools thanks to our partnership with eBay and their most trusted sellers. You won't find a better deal anywhere else!

Splicer Features:

  • Rugged construction providing shock, dust and moisture resistance
  • Dual monitor position with automatic image orientation
  • Automatic arc calibration and ribbon fiber identification
  • Auto-start tube heater feature
  • Color LCD display with anti-reflective coating for excellent visibility in bright sunlight
  • Simultaneous battery charge and splicer operation
  • Long life battery (up to 90 splice/heat cycles per charge)
  • Detachable work table incorporated into the transit case
  • Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet.
  • Green friendly – RoHS & WEEE compliant

Specifications:

  • Applicable Fibers: Single-mode (ITU-T G.652), Multimode (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)
  • Fiber Count: Single, 2, 4, 5, 6, 8, 10, 12
  • Cladding Diameter: 125μm
  • Coating Diameter: Ribbon: 0.25mm to 0.4mm, Single: 250μm and 900μm
  • Fiber Cleave Length: 10mm
  • Typical Average Splice Loss: 0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS; measured by cut-back method relevant to ITU-T and IEC standards
  • Splicing Time: Typical 20 seconds with standard single-mode fiber
  • Arc Calibration Method: Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available
  • Splicing Modes: 100 preset and user programmable modes
  • Splice Loss Estimate: Based upon dual camera cladding alignment data
  • Storage of Splice Result: Last 2000 splice results stored in the internal memory
  • Fiber Display: X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation
  • Magnification: 35X to 90X
  • Viewing Method: Dual cameras with 4.1 inch TFT color LCD monitor with anti-reflective coating
  • Operating Condition: 0 to 3,660m above sea level, 0 to 95% RH, and -10 to 50°C respectively.
  • Mechanical Proof Test: 1.96 to 2.25N
  • Tube Heater: Built-in tube heater with 30 heating modes; auto-start function
  • Tube Heating Time: Typical 50 seconds with FP-5 sleeve, 40 seconds with FP3 (40), 35-55 seconds with Fujikura micro sleeves
  • Protection Sleeve Length: 60mm, 40mm, Micro
  • Splice/Heat Cycles with Battery: Typical 90 cycles with power save functions activated
  • Power Supply: Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-13, 13.2V DC with BTR-08 battery
  • Terminals: USB 1.1 (USB-B type) for PC communication, Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
  • Wind Protection: Maximum wind velocity of 15m/s. (34 mph)
  • Dimensions: 136W x 161D x 143H (mm) / 5.3W x 6.3D x 5.6H (inches)
  • Weight: 2.1 kg (4.6 lbs) with AC adapter ADC-13; 2.5kg (5.5 lbs) with BTR-08 battery

Other Fujikura fusion splicer models: