|
Manufacturers
Equipment
Resources
|
Fujikura FSM-18R Fusion Splicer
The Fujikura FSM-18R fusion spliceris a 4-fiber ribbon splicer which is well-suited for FTTx or LAN applications. The FSM-18R can splice up to 4 fibers as well as capably handling single fiber splices. Its rugged construction and enhanced robust features provide resistance to shock, dust and rain to minimize downtime and improve operational performance. It has also been tested to withstand a 30" drop test.
Automated features such as auto-start splicing, auto-start tube heater operation, automatic ribbon fiber identification and auto-arc calibration reduce operational steps and improve splicing performance. Additional improvements include automatic image orientation when switching the dual position monitor, a large capacity battery option and the ability to charge the battery during splicer operation.
The software included with each FSM-18R splicer provides the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the splicer to enhance technical support.
Fiber Optic Tool Supply aims to be your leading destination for discovering a great selection of low-priced Fujikura fusion splicers. Don't spend more than necessary when you can find the Fujikura equipment you've been looking for right here - and all for prices that won't break your budget! Compare prices on new and used FSM-18R fusion splicers that are available for very affordable prices. We're able to offer you a great selection of competitively priced instruments and tools thanks to our partnership with eBay and their most trusted sellers. You won't find a better deal anywhere else!
Splicer Features:
- Rugged construction providing shock, dust and moisture resistance
- Dual monitor position with automatic image orientation
- Automatic arc calibration and ribbon fiber identification
- Auto-start tube heater
- Color LCD display with anti-reflective coating for excellent visibility in bright sunlight
- Simultaneous battery charge and splicer operation
- Long life battery (up to 90 splice/heat cycles per charge)
- Detachable work table incorporated into the transit case
- Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet.
- Green friendly – RoHS & WEEE compliant
Specifications:
- Applicable Fibers: Single-mode (ITU-T G.652), multimode (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)
- Fiber Count: Single, 2, 4
- Cladding Diameter: 125µm
- Coating Diameter: Ribbon: 0.25mm to 0.4mm; Single: 250µm and 900µm
- Fiber Cleave Length: 10mm
- Typical Average Splice Loss: 0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS, measured by cut-back method relevant to ITU-T and IEC standards
- Splicing Time: Typical 20 seconds with standard single-mode fiber
- Arc Calibration Method: Automatic, real-time by using results of previous splice when in AUTO mode, manual arc calibration function available
- Splicing Modes: 100 preset and user programmable modes
- Splice Loss Estimate: Based upon dual camera cladding alignment data
- Storage of Splice Result: Last 2000 splice results stored in the internal memory
- Fiber Display: X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation
- Magnification: 90X
- Viewing Method: Dual cameras with 4.1 inch TFT color LCD monitor with anti-reflective coating
- Operating Condition: 0 to 5,000m above sea level, 0 to 95% RH, -10 to 50°C respectively
- Mechanical Proof Test: 1.96 to 2.25N
- Tube Heater: Built-in tube heater with 30 heating modes; auto-start function
- Tube Heating Time: Typical 50 seconds with FP-5 sleeve, 40 seconds with FP3 (40), 35-55 seconds with Fujikura micro sleeves
- Protection Sleeve Length: 60mm, 40mm, micro
- Splice/Heat with Battery: Typical 90 cycles with power save functions activated
- Power Supply: Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-13, 13.2V DC with BTR-08 battery
- Terminals: USB 1.1 (USB-B type) for PC communication, Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
- Wind Protection: Maximum wind velocity of 15m/s. (34 mph)
- Dimensions: 136W x 161D x 143H (mm) / 5.3W x 6.3D x 5.6H (inches)
- Weight: 2.1 kg (4.6 lbs) with AC adapter ADC-13; 2.5kg (5.5 lbs) with BTR-08 battery
Other Fujikura fusion splicer models:
|
