|
Manufacturers
Equipment
Resources
|
Fujikura FSM-40S Fusion Splicer
Fujikura manufactures some of the highest quality fusion splicers on the market today. The FSM-40S series of splicers are ruggedly built to withstand the worst environmental conditions. They are ergonomically designed and offer a wide array of features. They are the ideal splicers for all of your splicing needs including demanding field work.
The FSM-40S fusion splicer from Fujikura delivers the benefits of PAS core alignment splicing in a field-friendly, highly portable, mini-splicer package. A wide variety of ergonomic features allow the FSM-40S to be used in difficult aerial taut-sheath splicing conditions, which require proper workflow and minimal fiber slack. The FSM-40S fusion splicer has been designed for use in the harshest, most demanding outdoor conditions. It is extremely rugged and features an innovative wind protector, which allows for splicing in 30 mph cross winds. The FSM-40SB fusion splicer has the same functionality as the FSM-40S but adds a front-mounted tube heater and rear-mounted monitor.
Fiber Optic Tool Supply aims to be your leading destination for discovering a great selection of low-priced Fujikura fusion splicers. Don't spend more than necessary when you can find the Fujikura equipment you've been looking for right here - and all for prices that won't break your budget! Compare prices on new and used FSM-40S series fusion splicers that are available for very affordable prices. We're able to offer you a great selection of competitively priced instruments and tools thanks to our partnership with eBay and their most trusted sellers. You won't find a better deal anywhere else!
Splicer Features:
- Fast 15 second average splicing time – the fastest in the industry!
- Automatic core to core low loss splicing regardless of fiber quality or age
- Ergonomic design for taut-sheath splicing
- Excellent visibility in bright sunlight with 5" LCD monitor
- Slide in power modules including AC adapter, battery, or camcorder battery adapter
- Multiple pre-programmed modes for specialized splicing
- Multiple tube heater and attenuation modes available
- Selectable image display includes single and dual axis fiber viewing
Specifications:
- Applicable fibers: SM (Singlemode), MM (Multimode) and DS (Dispersion shifted) fibers. NZ-DS (Non-zero dispersion shifted), CS (Cut-off shifted) and ED (Er doped) fibers are also applicable with special mode.
- Number of fibers to be spliced: Single to single fiber.
- Fiber cleaved length: 8 to 16mm with 250μm outer coating diameter. 16mm (standard) or 8 to 16mm (option) with outer coating diameter of more than 250μm up to 1000um (1.0mm).
- Actual average splice loss: 0.02dB with SMF, 0.01dB with MMF and 0.04dB with DSF to ITU-T Recommendations G.652, G.651 and G.653 respectively, when measured by the cut-back method to relevant ITU-T and IEC standards.
- Splicing time: Typical 18 sec.
- Return loss: >> 60dB.
- Splicing modes: 40 user programmable modes and up to 60 modes for reference (factory predetermined setting).
- Splice loss estimate: Core deformation and MFD mismatch as well as core axial offset can be taken into account for more accurate estimate.
- Attenuation splice function: Intentional high splice loss of 0.1dB to 15dB (0.1dB step) can be made for an in-line fixed attenuator.
- Storage of splice result: The last 2000 results to be stored in the internal memory.
- Fiber display: X/Y, or both X and Y simultaneously.
- Magnification of fiber: 264X or 132X.
- Viewing method: CCD camera and 5" TFT color LCD monitor.
- Altitude, Humidity and Temperature compensation: 0 to 3,500m above sea level. 0 to 95%RH and -10 to 50°C, respectively.
- Mechanical proof test: 2N (standard) / 4.4N (option)
- Tube heater: Built-in tube heater with 30 heating modes.
- Applicable protection sleeve length: 60mm, 40mm and a series of micro sleeves.
- No. of splices with detachable battery: Approx. 40 times (including heatings) per full charge with BTR-05.
- Power supply: Auto voltage selection from 100 to 240Va.c. with ADC-07, 10.5 to 14Vd.c. with DCA-01 and 12Vd.c. with BTR-05.
- Wind protection: Max. wind velocity of 15m/s.
- Dimensions: 172W x 186D x 180H (mm)
- Weight: 4.4kg (4.9kg including AC adapter ADC-07).
Other Fujikura fusion splicer models:
|
