|
Manufacturers
Equipment
Resources
|
Fujikura FSM-60S Fusion Splicer
The Fujikura FSM-60S fusion splicer sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today.
Compare prices on new and used FSM-60S fusion splicers on eBay.
The FSM-60S's tough construction resists shock, dust and rain improving reliability in field operations. It has also been tested to withstand a 30" drop test! The FSM-60S splices a fiber in 9 seconds and heats a 60mm splice sleeve in 30 seconds, for a total cycle time of only 39 seconds.
New features, such as automatic tube heater operation, user-selectable clamping method (sheath clamp or fiber holder system), automated monitor image orientation, and battery charge capability during splicer operation provide the end user a productivity tool they can count on. The new software which is included with the FSM-60S provides the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance and download video images from the splicer to enhance technical support.
Product Features:
- Rugged construction providing shock, dust and moisture resistance
- Dual monitor position with automatic image orientation
- Automatic arc calibration and fiber identification
- User-selectable fiber clamping method - sheath clamp or fiber holders
- Auto-start tube heater feature
- Color LCD display with anti-reflective coating for excellent visibility in bright sunlight
- Simultaneous battery charge and splicer operation
- Long life battery (up to 160 splice/heat cycles per charge)
- Detachable work table incorporated into the transit case
- Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet.
- Green friendly - RoHS & WEEE compliant
Specifications:
- Applicable Fibers: Single-mode (ITU-T G.652), Multimode (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)
- Cladding Diameter: 80µm to150µm
- Coating Diameter: 100µm to 1,000µm
- Fiber Cleave Length: 8 to 16mm with 250µm coating diameter, 16mm with 900µm coating diameter
- Typical Average Splice Loss: 0.02dB with SM, 0.01dB with MM,0.04dB with DS, 0.04dB with NZDS. Measured by cut-back method relevant to ITU-T and IEC standards
- Splicing Time: Typical 9 seconds with standard single-mode fiber
- Arc Calibration Method: Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
- Splicing Modes: 100 preset and user programmable modes
- Splice Loss Estimate: Based upon dual camera core alignment data
- Storage of Splice Result: Last 2000 results to be stored in the internal memory
- Fiber Display: X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
- Magnification: 300X for single X or Y view, or 187X for X and Y view
- Viewing Method: Dual cameras with 4.1 inch TFT color LCD monitor
- Operating Condition: 0 to 5,000m above sea level, 0 to 95%RH and -10 to 50°C respectively
- Mechanical Proof Test: 1.96 to 2.25N
- Tube Heater: Built-in tube heater with 30 heating modes; auto-start function
- Tube Heating Time: Typical 30 seconds with FP-03 sleeve, 35 seconds with FP3 (40), 35-55 seconds with Fujikura micro sleeves
- Protection Sleeve Length: 60mm, 40mm, micro
- Splice/Heat Cycles with Battery: Typical 160 cycles with power save functions activated
- Power Supply: Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11, 13.2V DC with BTR-08 battery
- Terminals: USB 1.1 (USB-B type) for PC communication. M ini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
- Wind Protection: Maximum wind velocity of 15m/s. (34 mph)
- Dimensions: 136W x 161D x 143H (mm) / 5.3W x 6.3D x 5.6H (inches)
- Weight: 2.3 kg (5.1 lbs) with AC adapter ADC-11; 2.7kg (5.9 lbs) with BTR-08 battery
|
