Fujikura FSM-19R Fusion Splicer

The Fujikura FSM-19R is a fully robust, 4-fibre ribbon splicer, providing consistent, low loss, splice performance. The new design streamlines the steps required to complete splices, resulting in greater productivity. 'Configurable automation' features allow you to customise the operation of the machine to best suit your particular splicing technique and process.

A new programmable 'automatic wind protector' closes and begins the splicing process after clamping the fibres in position or pressing the 'set' button. Once the splice is completed the wind protector is automatically raised making removal of the fibres fast and easy!

Similarly, the 'clamshell' design of the tube heater clamps the splice splice protection sleeve and applies heat from both sides which results in a reduced shrink time of just 14 seconds.

This revolutionary splicer is also available in a single splicing configuration as the FSM-19S.

Fiber Optic Tool Supply aims to be your leading destination for discovering a great selection of low-priced Fujikura fusion splicers. Don't spend more than necessary when you can find the Fujikura equipment you've been looking for right here - and all for prices that won't break your budget! Compare prices on new and used FSM-19R fusion splicers that are available for very affordable prices. We're able to offer you a great selection of competitively priced instruments and tools thanks to our partnership with eBay and their most trusted sellers. You won't find a better deal anywhere else!

Splicer Features:

Highly durable - designed for tough environments
Suitable for single fibre splicing
Cladding alignment with fixed V-groove
Auto-start tube heater
Optional fibre clamping methods
Splice image capture facility
Software upgrade via Internet
Includes multi-function worktable

Specifications:

Applicable Fibers: Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655)
Fiber Count: Single, 2, 4
Cladding Diameter: 125 μm
Coating Diameter: Ribbon: 0.25 mm to 0.4 mm; Single: 250 μm and 900 μm
Fiber Cleave Length: 10 mm
Typical Average Splice Loss: 0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS, measured by cut-back method relevant to ITU-T and IEC standards
Splicing Time: SM FAST mode - 11 seconds; SM AUTO mode - 15 seconds; Auto mode - 15 seconds
Arc Calibration Method: Automatic, real-time by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes: 100 preset and user programmable modes
Splice Loss Estimate Based upon dual camera cladding alignment data
Storage of Splice Result: Last 2000 splice results stored in the internal memory
Fiber Display: X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation
Magnification: 90X
Viewing Method: Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating
Operating Condition: 0 to 5,000 m above sea level, 0 to 95% RH, -10 to 50°C respectively
Mechanical Proof Test: 1.96 to 2.25 N
Tube Heater: Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time: Typical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves
Protection Sleeve Length: 60 mm, 40 mm, micro
Splice/Heat with Battery: Typical 140 cycles with power save functions activated
Power Supply: Auto voltage selection from 100 to 240V AC or 10 to 15V DC with AC Adapter, 13.2V DC with battery
Terminals: USB 1.1 (USB-B type) for PC communication, Mini-DIN (6-pin) for HJS-02/03
Wind Protection: Maximum wind velocity of 15m/s (34 mph)
Dimensions: 146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches)
Weight: 5.1 lbs (2.3 kg) with AC adapter; 5.5 lbs (2.5 kg) with battery

Other Fujikura fusion splicer models: